Add sdb cpu coherency #2
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
mcarlin-ds
pushed a commit
that referenced
this pull request
Oct 2, 2022
[ Upstream commit 4ff2980 ] in tunnel mode, if outer interface(ipv4) is less, it is easily to let inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message is received. When send again, packets are fragmentized with 1280, they are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2(). According to RFC4213 Section3.2.2: if (IPv4 path MTU - 20) is less than 1280 if packet is larger than 1280 bytes Send ICMPv6 "packet too big" with MTU=1280 Drop packet else Encapsulate but do not set the Don't Fragment flag in the IPv4 header. The resulting IPv4 packet might be fragmented by the IPv4 layer on the encapsulator or by some router along the IPv4 path. endif else if packet is larger than (IPv4 path MTU - 20) Send ICMPv6 "packet too big" with MTU = (IPv4 path MTU - 20). Drop packet. else Encapsulate and set the Don't Fragment flag in the IPv4 header. endif endif Packets should be fragmentized with ipv4 outer interface, so change it. After it is fragemtized with ipv4, there will be double fragmenation. No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized, then tunneled with IPv4(No.49& No.50), which obey spec. And received peer cannot decrypt it rightly. 48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50) 49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44) 50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000) 51 2002::10 2002::11 180 Echo (ping) request 52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50) xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below: 1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2] 2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50) 3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request Signed-off-by: Lina Wang <lina.wang@mediatek.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Oct 2, 2022
commit 7e0438f upstream. The following sequence of operations results in a refcount warning: 1. Open device /dev/tpmrm. 2. Remove module tpm_tis_spi. 3. Write a TPM command to the file descriptor opened at step 1. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4 refcount_t: addition on 0; use-after-free. Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4 brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835] CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2 Hardware name: BCM2711 [<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14) [<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8) [<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108) [<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8) [<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4) [<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm]) [<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm]) [<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0) [<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc) [<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c) Exception stack(0xc226bfa8 to 0xc226bff0) bfa0: 00000000 000105b4 00000003 beafe664 00000014 00000000 bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684 bfe0: 0000006c beafe648 0001056c b6eb6944 ---[ end trace d4b8409def9b8b1f ]--- The reason for this warning is the attempt to get the chip->dev reference in tpm_common_write() although the reference counter is already zero. Since commit 8979b02 ("tpm: Fix reference count to main device") the extra reference used to prevent a premature zero counter is never taken, because the required TPM_CHIP_FLAG_TPM2 flag is never set. Fix this by moving the TPM 2 character device handling from tpm_chip_alloc() to tpm_add_char_device() which is called at a later point in time when the flag has been set in case of TPM2. Commit fdc915f ("tpm: expose spaces via a device link /dev/tpmrm<n>") already introduced function tpm_devs_release() to release the extra reference but did not implement the required put on chip->devs that results in the call of this function. Fix this by putting chip->devs in tpm_chip_unregister(). Finally move the new implementation for the TPM 2 handling into a new function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the good case and error cases. Cc: stable@vger.kernel.org Fixes: fdc915f ("tpm: expose spaces via a device link /dev/tpmrm<n>") Fixes: 8979b02 ("tpm: Fix reference count to main device") Co-developed-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Oct 2, 2022
commit c51abd9 upstream. In many cases, keyctl_pkey_params_get_2() is validating the user buffer lengths against the wrong algorithm properties. Fix it to check against the correct properties. Probably this wasn't noticed before because for all asymmetric keys of the "public_key" subtype, max_data_size == max_sig_size == max_enc_size == max_dec_size. However, this isn't necessarily true for the "asym_tpm" subtype (it should be, but it's not strictly validated). Of course, future key types could have different values as well. Fixes: 00d60fd ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Oct 2, 2022
[ Upstream commit 447c799 ] Noticed the below warning while running a pytorch workload on vega10 GPUs. Change to trylock to avoid conflicts with already held reservation locks. [ +0.000003] WARNING: possible recursive locking detected [ +0.000003] 5.13.0-kfd-rajneesh #1030 Not tainted [ +0.000004] -------------------------------------------- [ +0.000002] python/4822 is trying to acquire lock: [ +0.000004] ffff932cd9a259f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000203] but task is already holding lock: [ +0.000003] ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000017] other info that might help us debug this: [ +0.000002] Possible unsafe locking scenario: [ +0.000003] CPU0 [ +0.000002] ---- [ +0.000002] lock(reservation_ww_class_mutex); [ +0.000004] lock(reservation_ww_class_mutex); [ +0.000003] *** DEADLOCK *** [ +0.000002] May be due to missing lock nesting notation [ +0.000003] 7 locks held by python/4822: [ +0.000003] #0: ffff932c4ac028d0 (&process->mutex){+.+.}-{3:3}, at: kfd_ioctl_map_memory_to_gpu+0x10b/0x320 [amdgpu] [ +0.000232] #1: ffff932c55e830a8 (&info->lock#2){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x64/0xf60 [amdgpu] [ +0.000241] #2: ffff932cc45b5e68 (&(*mem)->lock){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0xdf/0xf60 [amdgpu] [ +0.000236] #3: ffffb2b35606fd28 (reservation_ww_class_acquire){+.+.}-{0:0}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x232/0xf60 [amdgpu] [ +0.000235] #4: ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000015] #5: ffffffffc045f700 (*(sspp++)){....}-{0:0}, at: drm_dev_enter+0x5/0xa0 [drm] [ +0.000038] #6: ffff932c52da7078 (&vm->eviction_lock){+.+.}-{3:3}, at: amdgpu_vm_bo_update_mapping+0xd5/0x4f0 [amdgpu] [ +0.000195] stack backtrace: [ +0.000003] CPU: 11 PID: 4822 Comm: python Not tainted 5.13.0-kfd-rajneesh #1030 [ +0.000005] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F02 08/29/2018 [ +0.000003] Call Trace: [ +0.000003] dump_stack+0x6d/0x89 [ +0.000010] __lock_acquire+0xb93/0x1a90 [ +0.000009] lock_acquire+0x25d/0x2d0 [ +0.000005] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] __ww_mutex_lock.constprop.17+0xca/0x1060 [ +0.000007] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] ? lock_release+0x13f/0x270 [ +0.000005] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000185] ttm_bo_release+0x4c6/0x580 [ttm] [ +0.000010] amdgpu_bo_unref+0x1a/0x30 [amdgpu] [ +0.000183] amdgpu_vm_free_table+0x76/0xa0 [amdgpu] [ +0.000189] amdgpu_vm_free_pts+0xb8/0xf0 [amdgpu] [ +0.000189] amdgpu_vm_update_ptes+0x411/0x770 [amdgpu] [ +0.000191] amdgpu_vm_bo_update_mapping+0x324/0x4f0 [amdgpu] [ +0.000191] amdgpu_vm_bo_update+0x251/0x610 [amdgpu] [ +0.000191] update_gpuvm_pte+0xcc/0x290 [amdgpu] [ +0.000229] ? amdgpu_vm_bo_map+0xd7/0x130 [amdgpu] [ +0.000190] amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x912/0xf60 [amdgpu] [ +0.000234] kfd_ioctl_map_memory_to_gpu+0x182/0x320 [amdgpu] [ +0.000218] kfd_ioctl+0x2b9/0x600 [amdgpu] [ +0.000216] ? kfd_ioctl_unmap_memory_from_gpu+0x270/0x270 [amdgpu] [ +0.000216] ? lock_release+0x13f/0x270 [ +0.000006] ? __fget_files+0x107/0x1e0 [ +0.000007] __x64_sys_ioctl+0x8b/0xd0 [ +0.000007] do_syscall_64+0x36/0x70 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000007] RIP: 0033:0x7fbff90a7317 [ +0.000004] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48 [ +0.000005] RSP: 002b:00007fbe301fe648 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ +0.000006] RAX: ffffffffffffffda RBX: 00007fbcc402d820 RCX: 00007fbff90a7317 [ +0.000003] RDX: 00007fbe301fe690 RSI: 00000000c0184b18 RDI: 0000000000000004 [ +0.000003] RBP: 00007fbe301fe690 R08: 0000000000000000 R09: 00007fbcc402d880 [ +0.000003] R10: 0000000002001000 R11: 0000000000000246 R12: 00000000c0184b18 [ +0.000003] R13: 0000000000000004 R14: 00007fbf689593a0 R15: 00007fbcc402d820 Cc: Christian König <christian.koenig@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Oct 2, 2022
[ Upstream commit af68656 ] While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
…dler commit 42e19e6 upstream. Recent test_kprobe_missed kprobes kunit test uncovers the following error (reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled): BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 no locks held by kunit_try_catch/662. irq event stamp: 280 hardirqs last enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0 hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318 softirqs last enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G N 6.2.0-173644-g44c18d77f0c0 #2 Hardware name: IBM 3931 A01 704 (LPAR) Call Trace: [<00000003e60a3a00>] dump_stack_lvl+0x120/0x198 [<00000003e3d02e82>] __might_resched+0x60a/0x668 [<00000003e60b9908>] __mutex_lock+0xc0/0x14e0 [<00000003e60bad5a>] mutex_lock_nested+0x32/0x40 [<00000003e3f7b460>] unregister_kprobe+0x30/0xd8 [<00000003e51b2602>] test_kprobe_missed+0xf2/0x268 [<00000003e51b5406>] kunit_try_run_case+0x10e/0x290 [<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8 [<00000003e3ce30f8>] kthread+0x2d0/0x398 [<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8 [<00000003e60ccada>] ret_from_fork+0xa/0x40 The reason for this error report is that kprobes handling code failed to restore irqs. The problem is that when kprobe is triggered from another kprobe post_handler current sequence of enable_singlestep / disable_singlestep is the following: enable_singlestep <- original kprobe (saves kprobe_saved_imask) enable_singlestep <- kprobe triggered from post_handler (clobbers kprobe_saved_imask) disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask) disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask) There is just one kprobe_ctlblk per cpu and both calls saves and loads irq mask to kprobe_saved_imask. To fix the problem simply move resume_execution (which calls disable_singlestep) before calling post_handler. This also fixes the problem that post_handler is called with pt_regs which were not yet adjusted after single-stepping. Cc: stable@vger.kernel.org Fixes: 4ba069b ("[S390] add kprobes support.") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
commit 60eed1e upstream. code path: ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent __ocfs2_move_extent + ocfs2_journal_access_di + ocfs2_split_extent //sub-paths call jbd2_journal_restart + ocfs2_journal_dirty //crash by jbs2 ASSERT crash stacks: PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2" #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18 [exception RIP: jbd2_journal_dirty_metadata+0x2ba] RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250 RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000 R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28 R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2] #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2] #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2] Analysis This bug has the same root cause of 'commit 7f27ec9 ("ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is called by ocfs2_split_extent() during defragmenting. How to fix For ocfs2_split_extent() can handle journal operations totally by itself. Caller doesn't need to call journal access/dirty pair, and caller only needs to call journal start/stop pair. The fix method is to remove journal access/dirty from __ocfs2_move_extent(). The discussion for this patch: https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
[ Upstream commit e9e4229 ] The TC architecture allows filters and actions to be created independently. In filters the user can reference action objects using: tc action add action pedit ... index 1 tc filter add ... action pedit index 1 In the current code for act_pedit this is broken as it checks netlink attributes for create/update before actually checking if we are binding to an existing action. tdc results: 1..69 ok 1 319a - Add pedit action that mangles IP TTL ok 2 7e67 - Replace pedit action with invalid goto chain ok 3 377e - Add pedit action with RAW_OP offset u32 ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID) ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16 ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID) ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value ok 8 2893 - Add pedit action with RAW_OP offset u8 quad ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8 ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8 ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID) ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID) ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID) ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID) ok 32 ab06 - Add pedit action with LAYERED_OP eth add type ok 33 918d - Add pedit action with LAYERED_OP eth invert src ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type ok 36 7588 - Add pedit action with LAYERED_OP ip set src ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID) ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence ok 49 438e - Add pedit action with LAYERED_OP ip clear tos ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence ok 51 824a - Add pedit action with LAYERED_OP ip invert tos ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID) ok 56 815c - Add pedit action with LAYERED_OP ip6 set src ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID) ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID) ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1 ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2 Fixes: 71d0ed7 ("net/act_pedit: Support using offset relative to the conventional network headers") Fixes: f67169f ("net/sched: act_pedit: fix WARN() in the traffic path") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
[ Upstream commit 3dca1f8 ] Don't hold sdw_dev_lock while calling the peripheral driver probe() and remove() callbacks. Holding sdw_dev_lock around the probe() and remove() calls causes a theoretical mutex inversion which lockdep will assert on. During probe() the sdw_dev_lock mutex is taken first and then ASoC/ALSA locks are taken by the probe() implementation. During normal operation ASoC can take its locks and then trigger a runtime resume of the component. The SoundWire resume will then take sdw_dev_lock. This is the reverse order compared to probe(). It's not necessary to hold sdw_dev_lock when calling the probe() and remove(), it is only used to prevent the bus core calling the driver callbacks if there isn't a driver or the driver is removing. All calls to the driver callbacks are guarded by the 'probed' flag. So if sdw_dev_lock is held while setting and clearing the 'probed' flag this is sufficient to guarantee the safety of callback functions. Removing the mutex from around the call to probe() means that it is now possible for a bus event (PING response) to be handled in parallel with the probe(). But sdw_bus_probe() already has handling for this by calling the device update_status() after the probe() has completed. Example lockdep assert: [ 46.098514] ====================================================== [ 46.104736] WARNING: possible circular locking dependency detected [ 46.110961] 6.1.0-rc4-jamerson #1 Tainted: G E [ 46.116842] ------------------------------------------------------ [ 46.123063] mpg123/1130 is trying to acquire lock: [ 46.127883] ffff8b445031fb80 (&slave->sdw_dev_lock){+.+.}-{3:3}, at: sdw_update_slave_status+0x26/0x70 [ 46.137225] but task is already holding lock: [ 46.143074] ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.151536] which lock already depends on the new lock.[ 46.159732] the existing dependency chain (in reverse order) is: [ 46.167231] -> #4 (&card->pcm_mutex){+.+.}-{3:3}: [ 46.173428] __mutex_lock+0x94/0x920 [ 46.177542] snd_soc_dpcm_runtime_update+0x2e/0x100 [ 46.182958] snd_soc_dapm_put_enum_double+0x1c2/0x200 [ 46.188548] snd_ctl_elem_write+0x10c/0x1d0 [ 46.193268] snd_ctl_ioctl+0x126/0x850 [ 46.197556] __x64_sys_ioctl+0x87/0xc0 [ 46.201845] do_syscall_64+0x38/0x90 [ 46.205959] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.211553] -> #3 (&card->controls_rwsem){++++}-{3:3}: [ 46.218188] down_write+0x2b/0xd0 [ 46.222038] snd_ctl_add_replace+0x39/0xb0 [ 46.226672] snd_soc_add_controls+0x53/0x80 [ 46.231393] soc_probe_component+0x1e4/0x2a0 [ 46.236202] snd_soc_bind_card+0x51a/0xc80 [ 46.240836] devm_snd_soc_register_card+0x43/0x90 [ 46.246079] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.251500] platform_probe+0x3c/0xa0 [ 46.255700] really_probe+0xde/0x390 [ 46.259814] __driver_probe_device+0x78/0x180 [ 46.264710] driver_probe_device+0x1e/0x90 [ 46.269347] __driver_attach+0x9f/0x1f0 [ 46.273721] bus_for_each_dev+0x78/0xc0 [ 46.278098] bus_add_driver+0x1ac/0x200 [ 46.282473] driver_register+0x8f/0xf0 [ 46.286759] do_one_initcall+0x58/0x310 [ 46.291136] do_init_module+0x4c/0x1f0 [ 46.295422] __do_sys_finit_module+0xb4/0x130 [ 46.300321] do_syscall_64+0x38/0x90 [ 46.304434] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.310027] -> #2 (&card->mutex){+.+.}-{3:3}: [ 46.315883] __mutex_lock+0x94/0x920 [ 46.320000] snd_soc_bind_card+0x3e/0xc80 [ 46.324551] devm_snd_soc_register_card+0x43/0x90 [ 46.329798] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.335219] platform_probe+0x3c/0xa0 [ 46.339420] really_probe+0xde/0x390 [ 46.343532] __driver_probe_device+0x78/0x180 [ 46.348430] driver_probe_device+0x1e/0x90 [ 46.353065] __driver_attach+0x9f/0x1f0 [ 46.357437] bus_for_each_dev+0x78/0xc0 [ 46.361812] bus_add_driver+0x1ac/0x200 [ 46.366716] driver_register+0x8f/0xf0 [ 46.371528] do_one_initcall+0x58/0x310 [ 46.376424] do_init_module+0x4c/0x1f0 [ 46.381239] __do_sys_finit_module+0xb4/0x130 [ 46.386665] do_syscall_64+0x38/0x90 [ 46.391299] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.397416] -> #1 (client_mutex){+.+.}-{3:3}: [ 46.404307] __mutex_lock+0x94/0x920 [ 46.408941] snd_soc_add_component+0x24/0x2c0 [ 46.414345] devm_snd_soc_register_component+0x54/0xa0 [ 46.420522] cs35l56_common_probe+0x280/0x370 [snd_soc_cs35l56] [ 46.427487] cs35l56_sdw_probe+0xf4/0x170 [snd_soc_cs35l56_sdw] [ 46.434442] sdw_drv_probe+0x80/0x1a0 [ 46.439136] really_probe+0xde/0x390 [ 46.443738] __driver_probe_device+0x78/0x180 [ 46.449120] driver_probe_device+0x1e/0x90 [ 46.454247] __driver_attach+0x9f/0x1f0 [ 46.459106] bus_for_each_dev+0x78/0xc0 [ 46.463971] bus_add_driver+0x1ac/0x200 [ 46.468825] driver_register+0x8f/0xf0 [ 46.473592] do_one_initcall+0x58/0x310 [ 46.478441] do_init_module+0x4c/0x1f0 [ 46.483202] __do_sys_finit_module+0xb4/0x130 [ 46.488572] do_syscall_64+0x38/0x90 [ 46.493158] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.499229] -> #0 (&slave->sdw_dev_lock){+.+.}-{3:3}: [ 46.506737] __lock_acquire+0x1121/0x1df0 [ 46.511765] lock_acquire+0xd5/0x300 [ 46.516360] __mutex_lock+0x94/0x920 [ 46.520949] sdw_update_slave_status+0x26/0x70 [ 46.526409] sdw_clear_slave_status+0xd8/0xe0 [ 46.531783] intel_resume_runtime+0x139/0x2a0 [ 46.537155] __rpm_callback+0x41/0x120 [ 46.541919] rpm_callback+0x5d/0x70 [ 46.546422] rpm_resume+0x531/0x7e0 [ 46.550920] __pm_runtime_resume+0x4a/0x80 [ 46.556024] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.562611] __soc_pcm_open+0x62/0x520 [ 46.567375] dpcm_be_dai_startup+0x116/0x210 [ 46.572661] dpcm_fe_dai_open+0xf7/0x830 [ 46.577597] snd_pcm_open_substream+0x54a/0x8b0 [ 46.583145] snd_pcm_open.part.0+0xdc/0x200 [ 46.588341] snd_pcm_playback_open+0x51/0x80 [ 46.593625] chrdev_open+0xc0/0x250 [ 46.598129] do_dentry_open+0x15f/0x430 [ 46.602981] path_openat+0x75e/0xa80 [ 46.607575] do_filp_open+0xb2/0x160 [ 46.612162] do_sys_openat2+0x9a/0x160 [ 46.616922] __x64_sys_openat+0x53/0xa0 [ 46.621767] do_syscall_64+0x38/0x90 [ 46.626352] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.632414] other info that might help us debug this:[ 46.641862] Chain exists of: &slave->sdw_dev_lock --> &card->controls_rwsem --> &card->pcm_mutex[ 46.655145] Possible unsafe locking scenario:[ 46.662048] CPU0 CPU1 [ 46.667080] ---- ---- [ 46.672108] lock(&card->pcm_mutex); [ 46.676267] lock(&card->controls_rwsem); [ 46.683382] lock(&card->pcm_mutex); [ 46.690063] lock(&slave->sdw_dev_lock); [ 46.694574] *** DEADLOCK ***[ 46.701942] 2 locks held by mpg123/1130: [ 46.706356] #0: ffff8b4457b22b90 (&pcm->open_mutex){+.+.}-{3:3}, at: snd_pcm_open.part.0+0xc9/0x200 [ 46.715999] #1: ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.725390] stack backtrace: [ 46.730752] CPU: 0 PID: 1130 Comm: mpg123 Tainted: G E 6.1.0-rc4-jamerson #1 [ 46.739703] Hardware name: AAEON UP-WHL01/UP-WHL01, BIOS UPW1AM19 11/10/2020 [ 46.747270] Call Trace: [ 46.750239] <TASK> [ 46.752857] dump_stack_lvl+0x56/0x73 [ 46.757045] check_noncircular+0x102/0x120 [ 46.761664] __lock_acquire+0x1121/0x1df0 [ 46.766197] lock_acquire+0xd5/0x300 [ 46.770292] ? sdw_update_slave_status+0x26/0x70 [ 46.775432] ? lock_is_held_type+0xe2/0x140 [ 46.780143] __mutex_lock+0x94/0x920 [ 46.784241] ? sdw_update_slave_status+0x26/0x70 [ 46.789387] ? find_held_lock+0x2b/0x80 [ 46.793750] ? sdw_update_slave_status+0x26/0x70 [ 46.798894] ? lock_release+0x147/0x2f0 [ 46.803262] ? lockdep_init_map_type+0x47/0x250 [ 46.808315] ? sdw_update_slave_status+0x26/0x70 [ 46.813456] sdw_update_slave_status+0x26/0x70 [ 46.818422] sdw_clear_slave_status+0xd8/0xe0 [ 46.823302] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.828706] intel_resume_runtime+0x139/0x2a0 [ 46.833583] ? _raw_spin_unlock_irq+0x24/0x50 [ 46.838462] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.843866] __rpm_callback+0x41/0x120 [ 46.848142] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.853550] rpm_callback+0x5d/0x70 [ 46.857568] rpm_resume+0x531/0x7e0 [ 46.861578] ? _raw_spin_lock_irqsave+0x62/0x70 [ 46.866634] __pm_runtime_resume+0x4a/0x80 [ 46.871258] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.877358] __soc_pcm_open+0x62/0x520 [ 46.881634] ? dpcm_add_paths.isra.0+0x35d/0x4c0 [ 46.886784] dpcm_be_dai_startup+0x116/0x210 [ 46.891592] dpcm_fe_dai_open+0xf7/0x830 [ 46.896046] ? debug_mutex_init+0x33/0x50 [ 46.900591] snd_pcm_open_substream+0x54a/0x8b0 [ 46.905658] snd_pcm_open.part.0+0xdc/0x200 [ 46.910376] ? wake_up_q+0x90/0x90 [ 46.914312] snd_pcm_playback_open+0x51/0x80 [ 46.919118] chrdev_open+0xc0/0x250 [ 46.923147] ? cdev_device_add+0x90/0x90 [ 46.927608] do_dentry_open+0x15f/0x430 [ 46.931976] path_openat+0x75e/0xa80 [ 46.936086] do_filp_open+0xb2/0x160 [ 46.940194] ? lock_release+0x147/0x2f0 [ 46.944563] ? _raw_spin_unlock+0x29/0x50 [ 46.949101] do_sys_openat2+0x9a/0x160 [ 46.953377] __x64_sys_openat+0x53/0xa0 [ 46.957733] do_syscall_64+0x38/0x90 [ 46.961829] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.967402] RIP: 0033:0x7fa6397ccd3b [ 46.971506] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 [ 46.991413] RSP: 002b:00007fff838e8990 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [ 46.999580] RAX: ffffffffffffffda RBX: 0000000000080802 RCX: 00007fa6397ccd3b [ 47.007311] RDX: 0000000000080802 RSI: 00007fff838e8b50 RDI: 00000000ffffff9c [ 47.015047] RBP: 00007fff838e8b50 R08: 0000000000000000 R09: 0000000000000011 [ 47.022787] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080802 [ 47.030539] R13: 0000000000000004 R14: 0000000000000000 R15: 00007fff838e8b50 [ 47.038289] </TASK> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230123172520.339367-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
[ Upstream commit 0e68b55 ] Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs the following: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by kworker/u320:0/9: #0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41) #1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41) #2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101) Preemption disabled at: efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248) CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G W 6.2.0-rc3-rt1 Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18 Workqueue: efi_rts_wq efi_call_rts Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:158) show_stack (arch/arm64/kernel/stacktrace.c:165) dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) dump_stack (lib/dump_stack.c:114) __might_resched (kernel/sched/core.c:10134) rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4)) efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101) [...] This seems to come from commit ff7a167 ("arm64: efi: Execute runtime services from a dedicated stack") which adds a spinlock. This spinlock is taken through: efi_call_rts() \-efi_call_virt() \-efi_call_virt_pointer() \-arch_efi_call_virt_setup() Make 'efi_rt_lock' a raw_spinlock to avoid being preempted. [ardb: The EFI runtime services are called with a different set of translation tables, and are permitted to use the SIMD registers. The context switch code preserves/restores neither, and so EFI calls must be made with preemption disabled, rather than only disabling migration.] Fixes: ff7a167 ("arm64: efi: Execute runtime services from a dedicated stack") Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Cc: <stable@vger.kernel.org> # v6.1+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
[ Upstream commit 13085e1 ] The following LOCKDEP was detected: Workqueue: events smc_lgr_free_work [smc] WARNING: possible circular locking dependency detected 6.1.0-20221027.rc2.git8.56bc5b569087.300.fc36.s390x+debug #1 Not tainted ------------------------------------------------------ kworker/3:0/176251 is trying to acquire lock: 00000000f1467148 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}, at: __flush_workqueue+0x7a/0x4f0 but task is already holding lock: 0000037fffe97dc8 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_work+0x76/0xf0 __cancel_work_timer+0x170/0x220 __smc_lgr_terminate.part.0+0x34/0x1c0 [smc] smc_connect_rdma+0x15e/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #3 (smc_client_lgr_pending){+.+.}-{3:3}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __mutex_lock+0x96/0x8e8 mutex_lock_nested+0x32/0x40 smc_connect_rdma+0xa4/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #2 (sk_lock-AF_SMC){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 lock_sock_nested+0x46/0xa8 smc_tx_work+0x34/0x50 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #1 ((work_completion)(&(&smc->conn.tx_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 process_one_work+0x2bc/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #0 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}: check_prev_add+0xd8/0xe88 validate_chain+0x70c/0xb20 __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_workqueue+0xaa/0x4f0 drain_workqueue+0xaa/0x158 destroy_workqueue+0x44/0x2d8 smc_lgr_free+0x9e/0xf8 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 other info that might help us debug this: Chain exists of: (wq_completion)smc_tx_wq-00000000#2 --> smc_client_lgr_pending --> (work_completion)(&(&lgr->free_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&(&lgr->free_work)->work)); lock(smc_client_lgr_pending); lock((work_completion) (&(&lgr->free_work)->work)); lock((wq_completion)smc_tx_wq-00000000#2); *** DEADLOCK *** 2 locks held by kworker/3:0/176251: #0: 0000000080183548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x232/0x730 #1: 0000037fffe97dc8 ((work_completion) (&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 stack backtrace: CPU: 3 PID: 176251 Comm: kworker/3:0 Not tainted Hardware name: IBM 8561 T01 701 (z/VM 7.2.0) Call Trace: [<000000002983c3e4>] dump_stack_lvl+0xac/0x100 [<0000000028b477ae>] check_noncircular+0x13e/0x160 [<0000000028b48808>] check_prev_add+0xd8/0xe88 [<0000000028b49cc4>] validate_chain+0x70c/0xb20 [<0000000028b4bd26>] __lock_acquire+0x58e/0xbd8 [<0000000028b4cf6a>] lock_acquire.part.0+0xe2/0x248 [<0000000028b4d17c>] lock_acquire+0xac/0x1c8 [<0000000028addaaa>] __flush_workqueue+0xaa/0x4f0 [<0000000028addf9a>] drain_workqueue+0xaa/0x158 [<0000000028ae303c>] destroy_workqueue+0x44/0x2d8 [<000003ff8029af26>] smc_lgr_free+0x9e/0xf8 [smc] [<0000000028adf3d4>] process_one_work+0x30c/0x730 [<0000000028adf85a>] worker_thread+0x62/0x420 [<0000000028aeac50>] kthread+0x138/0x150 [<0000000028a63914>] __ret_from_fork+0x3c/0x58 [<00000000298503da>] ret_from_fork+0xa/0x40 INFO: lockdep is turned off. =================================================================== This deadlock occurs because cancel_delayed_work_sync() waits for the work(&lgr->free_work) to finish, while the &lgr->free_work waits for the work(lgr->tx_wq), which needs the sk_lock-AF_SMC, that is already used under the mutex_lock. The solution is to use cancel_delayed_work() instead, which kills off a pending work. Fixes: a52bcc9 ("net/smc: improve termination processing") Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Jan Karcher <jaka@linux.ibm.com> Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
…omic context commit 38ed310 upstream. The following issue was discovered using lockdep: [ 6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209 [ 6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0 [ 6.702431] 2 locks held by swapper/0/1: [ 6.706300] #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90 [ 6.714900] #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140 [ 6.723156] irq event stamp: 304030 [ 6.726596] hardirqs last enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0 [ 6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140 [ 6.744742] softirqs last enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894 [ 6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280 [ 6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G U 5.15.36 #2 [ 6.768048] Hardware name: xlnx,zynqmp (DT) [ 6.772179] Call trace: [ 6.774584] dump_backtrace+0x0/0x300 [ 6.778197] show_stack+0x18/0x30 [ 6.781465] dump_stack_lvl+0xb8/0xec [ 6.785077] dump_stack+0x1c/0x38 [ 6.788345] ___might_sleep+0x1a8/0x2a0 [ 6.792129] __might_sleep+0x6c/0xd0 [ 6.795655] kmem_cache_alloc_trace+0x270/0x3d0 [ 6.800127] do_feature_check_call+0x100/0x220 [ 6.804513] zynqmp_pm_invoke_fn+0x8c/0xb0 [ 6.808555] zynqmp_pm_clock_getstate+0x90/0xe0 [ 6.813027] zynqmp_pll_is_enabled+0x8c/0x120 [ 6.817327] zynqmp_pll_enable+0x38/0xc0 [ 6.821197] clk_core_enable+0x144/0x400 [ 6.825067] clk_core_enable+0xd4/0x400 [ 6.828851] clk_core_enable+0xd4/0x400 [ 6.832635] clk_core_enable+0xd4/0x400 [ 6.836419] clk_core_enable+0xd4/0x400 [ 6.840203] clk_core_enable+0xd4/0x400 [ 6.843987] clk_core_enable+0xd4/0x400 [ 6.847771] clk_core_enable+0xd4/0x400 [ 6.851555] clk_core_enable_lock+0x24/0x50 [ 6.855683] clk_enable+0x24/0x40 [ 6.858952] fclk_probe+0x84/0xf0 [ 6.862220] platform_probe+0x8c/0x110 [ 6.865918] really_probe+0x110/0x5f0 [ 6.869530] __driver_probe_device+0xcc/0x210 [ 6.873830] driver_probe_device+0x64/0x140 [ 6.877958] __driver_attach+0x114/0x1f0 [ 6.881828] bus_for_each_dev+0xe8/0x160 [ 6.885698] driver_attach+0x34/0x50 [ 6.889224] bus_add_driver+0x228/0x300 [ 6.893008] driver_register+0xc0/0x1e0 [ 6.896792] __platform_driver_register+0x44/0x60 [ 6.901436] fclk_driver_init+0x1c/0x28 [ 6.905220] do_one_initcall+0x104/0x590 [ 6.909091] kernel_init_freeable+0x254/0x2bc [ 6.913390] kernel_init+0x24/0x130 [ 6.916831] ret_from_fork+0x10/0x20 Fix it by passing the GFP_ATOMIC gfp flag for the corresponding memory allocation. Fixes: acfdd18 ("firmware: xilinx: Use hash-table for api feature check") Cc: stable <stable@kernel.org> Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20230308222602.123866-1-roman.gushchin@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
[ Upstream commit 2b4cc3d ] The check introduced in the commit a5fd394 ("igc: Lift TAPRIO schedule restriction") can detect a false positive error in some corner case. For instance, tc qdisc replace ... taprio num_tc 4 ... sched-entry S 0x01 100000 # slot#1 sched-entry S 0x03 100000 # slot#2 sched-entry S 0x04 100000 # slot#3 sched-entry S 0x08 200000 # slot#4 flags 0x02 # hardware offload Here the queue#0 (the first queue) is on at the slot#1 and #2, and off at the slot#3 and #4. Under the current logic, when the slot#4 is examined, validate_schedule() returns *false* since the enablement count for the queue#0 is two and it is already off at the previous slot (i.e. #3). But this definition is truely correct. Let's fix the logic to enforce a strict validation for consecutively-opened slots. Fixes: a5fd394 ("igc: Lift TAPRIO schedule restriction") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
[ Upstream commit 4e264be ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] STMicroelectronics#13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] STMicroelectronics#14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 STMicroelectronics#15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 STMicroelectronics#16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 STMicroelectronics#17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 STMicroelectronics#18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 STMicroelectronics#19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc STMicroelectronics#20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d STMicroelectronics#21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 STMicroelectronics#22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 00cbce5 ] hfi1 user SDMA request processing has two bugs that can cause data corruption for user SDMA requests that have multiple payload iovecs where an iovec other than the tail iovec does not run up to the page boundary for the buffer pointed to by that iovec.a Here are the specific bugs: 1. user_sdma_txadd() does not use struct user_sdma_iovec->iov.iov_len. Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec to the packet, even if some of those bytes are past iovec->iov.iov_len and are thus not intended to be in the packet. 2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the next iovec in user_sdma_request->iovs when the current iovec is not PAGE_SIZE and does not contain enough data to complete the packet. The transmitted packet will contain the wrong data from the iovec pages. This has not been an issue with SDMA packets from hfi1 Verbs or PSM2 because they only produce iovecs that end short of PAGE_SIZE as the tail iovec of an SDMA request. Fixing these bugs exposes other bugs with the SDMA pin cache (struct mmu_rb_handler) that get in way of supporting user SDMA requests with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So this commit fixes those issues as well. Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec payload user SDMA requests can hit: 1. Overlapping memory ranges in mmu_rb_handler will result in duplicate pinnings. 2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node), the mmu_rb code (1) removes the existing entry under a lock, (2) releases that lock, pins the new pages, (3) then reacquires the lock to insert the extended mmu_rb_node. If someone else comes in and inserts an overlapping entry between (2) and (3), insert in (3) will fail. The failure path code in this case unpins _all_ pages in either the original mmu_rb_node or the new mmu_rb_node that was inserted between (2) and (3). 3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node->refcount is incremented outside of mmu_rb_handler->lock. As a result, mmu_rb_node could be evicted by another thread that gets mmu_rb_handler->lock and checks mmu_rb_node->refcount before mmu_rb_node->refcount is incremented. 4. Related to #2 above, SDMA request submission failure path does not check mmu_rb_node->refcount before freeing mmu_rb_node object. If there are other SDMA requests in progress whose iovecs have pointers to the now-freed mmu_rb_node(s), those pointers to the now-freed mmu_rb nodes will be dereferenced when those SDMA requests complete. Fixes: 7be8567 ("IB/hfi1: Don't remove RB entry when not needed.") Fixes: 7724105 ("IB/hfi1: add driver files") Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com> Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Link: https://lore.kernel.org/r/168088636445.3027109.10054635277810177889.stgit@252.162.96.66.static.eigbox.net Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 91d6a46 ] gpi_ch_init() doesn't lock the ctrl_lock mutex, so there is no need to unlock it too. Instead the mutex is handled by the function gpi_alloc_chan_resources(), which properly locks and unlocks the mutex. ===================================== WARNING: bad unlock balance detected! 6.3.0-rc5-00253-g99792582ded1-dirty STMicroelectronics#15 Not tainted ------------------------------------- kworker/u16:0/9 is trying to release lock (&gpii->ctrl_lock) at: [<ffffb99d04e1284c>] gpi_alloc_chan_resources+0x108/0x5bc but there are no more locks to release! other info that might help us debug this: 6 locks held by kworker/u16:0/9: #0: ffff575740010938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x220/0x594 #1: ffff80000809bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x220/0x594 #2: ffff575740f2a0f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 #3: ffff57574b5570f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 #4: ffffb99d06a2f180 (of_dma_lock){+.+.}-{3:3}, at: of_dma_request_slave_channel+0x138/0x280 #5: ffffb99d06a2ee20 (dma_list_mutex){+.+.}-{3:3}, at: dma_get_slave_channel+0x28/0x10c stack backtrace: CPU: 7 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc5-00253-g99792582ded1-dirty STMicroelectronics#15 Hardware name: Google Pixel 3 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0xa0/0xfc show_stack+0x18/0x24 dump_stack_lvl+0x60/0xac dump_stack+0x18/0x24 print_unlock_imbalance_bug+0x130/0x148 lock_release+0x270/0x300 __mutex_unlock_slowpath+0x48/0x2cc mutex_unlock+0x20/0x2c gpi_alloc_chan_resources+0x108/0x5bc dma_chan_get+0x84/0x188 dma_get_slave_channel+0x5c/0x10c gpi_of_dma_xlate+0x110/0x1a0 of_dma_request_slave_channel+0x174/0x280 dma_request_chan+0x3c/0x2d4 geni_i2c_probe+0x544/0x63c platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 device_add+0x60c/0x7d8 of_device_add+0x44/0x60 of_platform_device_create_pdata+0x90/0x124 of_platform_bus_create+0x15c/0x3c8 of_platform_populate+0x58/0xf8 devm_of_platform_populate+0x58/0xbc geni_se_probe+0xf0/0x164 platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x2bc/0x594 worker_thread+0x228/0x438 kthread+0x108/0x10c ret_from_fork+0x10/0x20 Fixes: 5d0c353 ("dmaengine: qcom: Add GPI dma driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230409233355.453741-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 45121ad ] The PSP IRQ is edge-triggered (MSI or MSI-X) in all cases supported by the psp module so clear the interrupt status register early in the handler to prevent missed interrupts. sev_irq_handler() calls wake_up() on a wait queue, which can result in a new command being submitted from a different CPU. This then races with the clearing of isr and can result in missed interrupts. A missed interrupt results in a command waiting until it times out, which results in the psp being declared dead. This is unlikely on bare metal, but has been observed when running virtualized. In the cases where this is observed, sev->cmdresp_reg has PSP_CMDRESP_RESP set which indicates that the command was processed correctly but no interrupt was asserted. The full sequence of events looks like this: CPU 1: submits SEV cmd #1 CPU 1: calls wait_event_timeout() CPU 0: enters psp_irq_handler() CPU 0: calls sev_handler()->wake_up() CPU 1: wakes up; finishes processing cmd #1 CPU 1: submits SEV cmd #2 CPU 1: calls wait_event_timeout() PSP: finishes processing cmd #2; interrupt status is still set; no interrupt CPU 0: clears intsts CPU 0: exits psp_irq_handler() CPU 1: wait_event_timeout() times out; psp_dead=true Fixes: 200664d ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support") Cc: stable@vger.kernel.org Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit dfd9248 ] KCSAN found a data race in sock_recv_cmsgs() where the read access to sk->sk_stamp needs READ_ONCE(). BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0: sock_write_timestamp include/net/sock.h:2670 [inline] sock_recv_cmsgs include/net/sock.h:2722 [inline] packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1: sock_recv_cmsgs include/net/sock.h:2721 [inline] packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0xffffffffc4653600 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 6c7c98b ("sock: avoid dirtying sk_stamp, if possible") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230508175543.55756-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 679ed00 ] KCSAN found a data race of sk->sk_receive_queue->qlen where recvmsg() updates qlen under the queue lock and sendmsg() checks qlen under unix_state_sock(), not the queue lock, so the reader side needs READ_ONCE(). BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_wait_for_peer write (marked) to 0xffff888019fe7c68 of 4 bytes by task 49792 on cpu 0: __skb_unlink include/linux/skbuff.h:2347 [inline] __skb_try_recv_from_queue+0x3de/0x470 net/core/datagram.c:197 __skb_try_recv_datagram+0xf7/0x390 net/core/datagram.c:263 __unix_dgram_recvmsg+0x109/0x8a0 net/unix/af_unix.c:2452 unix_dgram_recvmsg+0x94/0xa0 net/unix/af_unix.c:2549 sock_recvmsg_nosec net/socket.c:1019 [inline] ____sys_recvmsg+0x3a3/0x3b0 net/socket.c:2720 ___sys_recvmsg+0xc8/0x150 net/socket.c:2764 do_recvmmsg+0x182/0x560 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x153/0x170 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff888019fe7c68 of 4 bytes by task 49793 on cpu 1: skb_queue_len include/linux/skbuff.h:2127 [inline] unix_recvq_full net/unix/af_unix.c:229 [inline] unix_wait_for_peer+0x154/0x1a0 net/unix/af_unix.c:1445 unix_dgram_sendmsg+0x13bc/0x14b0 net/unix/af_unix.c:2048 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x148/0x160 net/socket.c:747 ____sys_sendmsg+0x20e/0x620 net/socket.c:2503 ___sys_sendmsg+0xc6/0x140 net/socket.c:2557 __sys_sendmmsg+0x11d/0x370 net/socket.c:2643 __do_sys_sendmmsg net/socket.c:2672 [inline] __se_sys_sendmmsg net/socket.c:2669 [inline] __x64_sys_sendmmsg+0x58/0x70 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x0000000b -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 49793 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit e1d09c2 ] KCSAN found a data race around sk->sk_shutdown where unix_release_sock() and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll() and unix_dgram_poll() read it locklessly. We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE(). BUG: KCSAN: data-race in unix_poll / unix_release_sock write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1042 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1397 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1: unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170 sock_poll+0xcf/0x2b0 net/socket.c:1385 vfs_poll include/linux/poll.h:88 [inline] ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855 ep_send_events fs/eventpoll.c:1694 [inline] ep_poll fs/eventpoll.c:1823 [inline] do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258 __do_sys_epoll_wait fs/eventpoll.c:2270 [inline] __se_sys_epoll_wait fs/eventpoll.c:2265 [inline] __x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 3c73419 ("af_unix: fix 'poll for write'/ connected DGRAM sockets") Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit d2c48b2 ] Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/ Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20230216084920.144064-1-pierre.gondois@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d STMicroelectronics#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
commit 597441b upstream. Our CI system caught a lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc7+ #1167 Not tainted ------------------------------------------------------ kswapd0/46 is trying to acquire lock: ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120 but task is already holding lock: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0xa5/0xe0 kmem_cache_alloc+0x31/0x2c0 alloc_extent_state+0x1d/0xd0 __clear_extent_bit+0x2e0/0x4f0 try_release_extent_mapping+0x216/0x280 btrfs_release_folio+0x2e/0x90 invalidate_inode_pages2_range+0x397/0x470 btrfs_cleanup_dirty_bgs+0x9e/0x210 btrfs_cleanup_one_transaction+0x22/0x760 btrfs_commit_transaction+0x3b7/0x13a0 create_subvol+0x59b/0x970 btrfs_mksubvol+0x435/0x4f0 __btrfs_ioctl_snap_create+0x11e/0x1b0 btrfs_ioctl_snap_create_v2+0xbf/0x140 btrfs_ioctl+0xa45/0x28f0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc -> #0 (sb_internal#2){++++}-{0:0}: __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 start_transaction+0x401/0x730 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 kthread+0xf0/0x120 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); *** DEADLOCK *** 3 locks held by kswapd0/46: #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290 #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0 stack backtrace: CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x58/0x90 check_noncircular+0xd6/0x100 ? save_trace+0x3f/0x310 ? add_lock_to_list+0x97/0x120 __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 start_transaction+0x401/0x730 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 ? lock_release+0x134/0x270 ? __pfx_wake_bit_function+0x10/0x10 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 ? __pfx_inode_lru_isolate+0x10/0x10 ? __pfx_inode_lru_isolate+0x10/0x10 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xf0/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> This happens because when we abort the transaction in the transaction commit path we call invalidate_inode_pages2_range on our block group cache inodes (if we have space cache v1) and any delalloc inodes we may have. The plain invalidate_inode_pages2_range() call passes through GFP_KERNEL, which makes sense in most cases, but not here. Wrap these two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to make sure we don't end up with the fs reclaim dependency under the transaction dependency. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 691c041 ] Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196b ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Sep 13, 2024
[ Upstream commit 4428399 ] The lt8912b driver, in its bridge detach function, calls drm_connector_unregister() and drm_connector_cleanup(). drm_connector_unregister() should be called only for connectors explicitly registered with drm_connector_register(), which is not the case in lt8912b. The driver's drm_connector_funcs.destroy hook is set to drm_connector_cleanup(). Thus the driver should not call either drm_connector_unregister() nor drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a crash on bridge detach: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000 [0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks CPU: 3 PID: 462 Comm: rmmod Tainted: G W 6.5.0-rc2+ #2 Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_connector_cleanup+0x78/0x2d4 [drm] lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] sp : ffff800082ed3a90 x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000 x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122 x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000 x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8 x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038 x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48 x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: drm_connector_cleanup+0x78/0x2d4 [drm] lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] drm_bridge_detach+0x44/0x84 [drm] drm_encoder_cleanup+0x40/0xb8 [drm] drmm_encoder_alloc_release+0x1c/0x30 [drm] drm_managed_release+0xac/0x148 [drm] drm_dev_put.part.0+0x88/0xb8 [drm] devm_drm_dev_init_release+0x14/0x24 [drm] devm_action_release+0x14/0x20 release_nodes+0x5c/0x90 devres_release_all+0x8c/0xe0 device_unbind_cleanup+0x18/0x68 device_release_driver_internal+0x208/0x23c driver_detach+0x4c/0x94 bus_remove_driver+0x70/0xf4 driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 tidss_platform_driver_exit+0x18/0xb2c [tidss] __arm64_sys_delete_module+0x1a0/0x2b4 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x60/0x10c do_el0_svc_compat+0x1c/0x40 el0_svc_compat+0x40/0xac el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420) Fixes: 30e2ae9 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-2-c542692c6a2f@ideasonboard.com Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Sep 13, 2024
[ Upstream commit 265f3ed ] All callers of work_on_cpu() share the same lock class key for all the functions queued. As a result the workqueue related locking scenario for a function A may be spuriously accounted as an inversion against the locking scenario of function B such as in the following model: long A(void *arg) { mutex_lock(&mutex); mutex_unlock(&mutex); } long B(void *arg) { } void launchA(void) { work_on_cpu(0, A, NULL); } void launchB(void) { mutex_lock(&mutex); work_on_cpu(1, B, NULL); mutex_unlock(&mutex); } launchA and launchB running concurrently have no chance to deadlock. However the above can be reported by lockdep as a possible locking inversion because the works containing A() and B() are treated as belonging to the same locking class. The following shows an existing example of such a spurious lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.6.0-rc1-00065-g934ebd6e5359 #35409 Not tainted ------------------------------------------------------ kworker/0:1/9 is trying to acquire lock: ffffffff9bc72f30 (cpu_hotplug_lock){++++}-{0:0}, at: _cpu_down+0x57/0x2b0 but task is already holding lock: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __flush_work+0x83/0x4e0 work_on_cpu+0x97/0xc0 rcu_nocb_cpu_offload+0x62/0xb0 rcu_nocb_toggle+0xd0/0x1d0 kthread+0xe6/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x1b/0x30 -> #1 (rcu_state.barrier_mutex){+.+.}-{3:3}: __mutex_lock+0x81/0xc80 rcu_nocb_cpu_deoffload+0x38/0xb0 rcu_nocb_toggle+0x144/0x1d0 kthread+0xe6/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x1b/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1538/0x2500 lock_acquire+0xbf/0x2a0 percpu_down_write+0x31/0x200 _cpu_down+0x57/0x2b0 __cpu_down_maps_locked+0x10/0x20 work_for_cpu_fn+0x15/0x20 process_scheduled_works+0x2a7/0x500 worker_thread+0x173/0x330 kthread+0xe6/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> rcu_state.barrier_mutex --> (work_completion)(&wfc.work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&wfc.work)); lock(rcu_state.barrier_mutex); lock((work_completion)(&wfc.work)); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by kworker/0:1/9: #0: ffff900481068b38 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x212/0x500 #1: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500 stack backtrace: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.0-rc1-00065-g934ebd6e5359 #35409 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Workqueue: events work_for_cpu_fn Call Trace: rcu-torture: rcu_torture_read_exit: Start of episode <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x132/0x150 __lock_acquire+0x1538/0x2500 lock_acquire+0xbf/0x2a0 ? _cpu_down+0x57/0x2b0 percpu_down_write+0x31/0x200 ? _cpu_down+0x57/0x2b0 _cpu_down+0x57/0x2b0 __cpu_down_maps_locked+0x10/0x20 work_for_cpu_fn+0x15/0x20 process_scheduled_works+0x2a7/0x500 worker_thread+0x173/0x330 ? __pfx_worker_thread+0x10/0x10 kthread+0xe6/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK Fix this with providing one lock class key per work_on_cpu() caller. Reported-and-tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Sep 13, 2024
commit 5a22fbc upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: stable@vger.kernel.org Fixes: dc70058 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Sep 13, 2024
[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb STMicroelectronics#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 STMicroelectronics#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 STMicroelectronics#15 [ffff88aa841efb88] device_del at ffffffff82179d23 STMicroelectronics#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] STMicroelectronics#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] STMicroelectronics#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a STMicroelectronics#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff STMicroelectronics#20 [ffff88aa841eff10] kthread at ffffffff811d87a0 STMicroelectronics#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Sep 13, 2024
[ Upstream commit ec51fbd ] Subclassing the generic USB device driver to override the default configuration selection regardless of matching interface drivers. The r815x family devices expose a vendor specific function which the r8152 interface driver wants to handle. This is the preferred device mode. Additionally one or more USB class functions are usually supported for hosts lacking a vendor specific driver. The choice is USB configuration based, with one alternate function per configuration. Example device with both NCM and ECM alternate cfgs: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 3 P: Vendor=0bda ProdID=8156 Rev=31.00 S: Manufacturer=Realtek S: Product=USB 10/100/1G/2.5G LAN S: SerialNumber=001000001 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=256mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=r8152 E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=128ms C: #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms A problem with this is that Linux will prefer class functions over vendor specific functions. Using the above example, Linux defaults to cfg #2, running the device in a sub-optimal NCM mode. Previously we've attempted to work around the problem by blacklisting the devices in the ECM class driver "cdc_ether", and matching on the ECM class function in the vendor specific interface driver. The latter has been used to switch back to the vendor specific configuration when the driver is probed for a class function. This workaround has several issues; - class driver blacklists is additional maintanence cruft in an unrelated driver - class driver blacklists prevents users from optionally running the devices in class mode - each device needs double match entries in the vendor driver - the initial probing as a class function slows down device discovery Now these issues have become even worse with the introduction of firmware supporting both NCM and ECM, where NCM ends up as the default mode in Linux. To use the same workaround, we now have to blacklist the devices in to two different class drivers and add yet another match entry to the vendor specific driver. This patch implements an alternative workaround strategy - independent of the interface drivers. It avoids adding a blacklist to the cdc_ncm driver and will let us remove the existing blacklist from the cdc_ether driver. As an additional bonus, removing the blacklists allow users to select one of the other device modes if wanted. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Sep 13, 2024
[ Upstream commit 15319a4 ] As &card->tx_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #2> pclose() --> spin_lock(&card->tx_queue_lock) <interrupt> --> solos_bh() --> fpga_tx() --> spin_lock(&card->tx_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on &card->tx_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 213e85d ("solos-pci: clean up pclose() function") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Sep 13, 2024
[ Upstream commit 807252f ] Running smb2.rename test from Samba smbtorture suite against a kernel built with lockdep triggers a "possible recursive locking detected" warning. This is because mnt_want_write() is called twice with no mnt_drop_write() in between: -> ksmbd_vfs_mkdir() -> ksmbd_vfs_kern_path_create() -> kern_path_create() -> filename_create() -> mnt_want_write() -> mnt_want_write() Fix this by removing the mnt_want_write/mnt_drop_write calls from vfs helpers that call kern_path_create(). Full lockdep trace below: ============================================ WARNING: possible recursive locking detected 6.6.0-rc5 torvalds#775 Not tainted -------------------------------------------- kworker/1:1/32 is trying to acquire lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: ksmbd_vfs_mkdir+0xe1/0x410 but task is already holding lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_writers#5); lock(sb_writers#5); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/1:1/32: #0: ffff8880064e4138 ((wq_completion)ksmbd-io){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #1: ffff888005b0fdd0 ((work_completion)(&work->work)){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #2: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 #3: ffff8880057ce760 (&type->i_mutex_dir_key#3/1){+.+.}-{3:3}, at: filename_create+0x123/0x260 Cc: stable@vger.kernel.org Fixes: 40b268d ("ksmbd: add mnt_want_write to ksmbd vfs functions") Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.